Low voltage 24v thermostat soldering pen protects the faulty circuit board 低壓恒溫24v烙鐵有效保護維修線路板。
A united stimulation acquisition algorithm was designed for detecting the faulty circuits under automatic test equipment in order to decrease the test cost 設計了適合自動測試系統進行模擬電路參數故障檢測的聯合激勵方式提取算法以降低測試成本。
Three different d - fronts are defined in this paper , and the test generation is consisted of three parts : to excite the fault at first ; to maximize the iddt difference between fault - free circuit and faulty circuit at second ; and finally to minimize the effect of bypass 文中定義了三種不同的d前沿,并將測試生成分為三個部分: 1 、激活故障, 2 、使無故障電路和故障電路的瞬態電流差別最大化, 3 、減少旁路的影響。
Among the many testing methods of analog and mixed signal circuits booming up in recent years , the pseudorandom testing technique is easier to generate testing stimuli and the current - based testing method could magnify the response differences between fault - free circuits and faulty circuits 近年來提出的很多種模擬及混合信號電路測試方法中,偽隨機測試法易于產生測試激勵,基于電流的測試法能使正常電路和故障電路的頻率響應的差別增大。